1983 Ford F150 "car idles perfect dies accelerateing" Questions

Ad

...idles ok and can accelerate the engine but when the engine is placed under a load such as trying to go somewhere the engine sputters boggs down and dies. Fuel pressure is between 44 and 50 psi, fuel ...

Ad

...die when I press the accelerator any amount. I have replaced all rubber fuel hose from tanks to the carb. I tried a new mechanical pump the old mechanical pump and a new electric pump on it. Replaced ...

Ad

...idles perfect no acceleration, jeep starts and idles perfect no acceleration- engine pops and sputters and will die. Changed plugs, wires, tps, cps, map sensor, no vacuum leaks. I am lost, also where ...

...loses power on excelleration ..low speed runs great starts idles,accelerates smooth then tries to die..runs perfect at lower rpm perfectly ..any ideas? Tune up ,plugs ,coils ,wires,fuel

...idles perfectly. hey-I have has this before different car but same - idle control valve is failing - computer at shop will pick this up on diagnostic No its not the idle control valve. In 2004 dodge ...

Question about Isuzu Cars & Trucks

1 Answer

...Dies decelerating to stop. Bad idle, misfires and studders. Stinky exhaust with soot at idle. Erratic acceleration. Codes say EGR valve. Maybe Oxy Sensors on exhaust ?? Runs PERFECT when cold, and ...

Question about Ford F-150

1 Answer

car idles perfectly but as soon as you accelerate to about 3000 revs it starts to die. have replaced fuel filter, air filter and spark plugs The catalytic converter may be clogged which chokes out the

...car will fire up and idle perfect but as soon as you try to give it gas it dies. Upon trying to restart it, it acts like it has no compression. Let it sit a couple minutes and it will fire right back ...

...idles OK but sometimes it stumbles like it is out of gas above idle. When you are driving along you have to put your foot to the floor to go. If you let up at all it dies. Some times it will do this ...

...car sometimes idles rough and stumbles some after starting. Replaced crank positioning sensor and maf sensor, problem still exists. This is a 3.5 engine. hcmartini - did you mean you replaced the ...

Not finding what you are looking for?
Cars & Trucks Logo

208 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Ford F150
2004 Ford F150

2,636 Questions

1990 Ford F150
1990 Ford F150

1,214 Questions

2005 Ford F-150
2005 Ford F-150

1,298 Questions

2006 Ford F-150
2006 Ford F-150

1,038 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...