2000 Ford Explorer "install temp sensor 98" Questions

Ad

Question about Ford Explorer

3 Answers

...install it over the radiator pour in water/coolant 50/50 mix get car to operating temp and you will see the cooling system burp for a while that is a good thing allow this to continue until all the ...

Ad

temp gauge at your local parts store and install the temperature probe into the hole where the temp sensor was located and run the engine. It sounds like you have a guage malfunction. But is better to

Ad

Question about Ford Explorer

1 Answer

...install in the car as we figure it's a a short in the wire. Our next step is to take it to the dealer if we can't fix it with replacing the wire. Thanks Ensure you are checking the right sensor. The ...

...temp sensor.Be sure to double check your coolant level and does the engine reach an operating temp(about halfway on the guage)in a normal time?! If it does, the temp sensor for the computer needs to ...

Question about Ford Explorer

1 Answer

...sensor for temp gauge is bad versus if the car is actually overheating? You could have multiple issues. It's possible the coolant temp sensor is bad. Resulting in the overheating/car turning off. ...

Question about Ford Explorer

2 Answers

...at is that the temp gauge is probably not right. The only way to verify this is it either use a scan tool to see what temp is being reported to the PCM or install an aftermarket temperature

should be able to do it for you. Temperature showing -38c will be the ambient temp sensor. Only a couple of dollars normally and normally installs in the front bumper somewhere, easy to do it yourself

Question about Ford Explorer

2 Answers

...temp sensor is located on the thermostat housing and should have 2 wire plug on it..trace the wires to see if there are any breaks, worn spots, etc.... second, the problem with the vents is most ...

Question about Ford Explorer

2 Answers

...temp sensor. If the sensor is off or corroded, the computer won't feed enuf gas. the only thing i could think is wrong is that when the coil on wrong way would of shot the voltage to the ecu, the ecu ...

...sensor, temp sensor ,ecu... was the TPS installed correctly, u have to make sure the ECU 5volts is ok (4.8-5.2) then adjust the first channel to the correct setting, then check the second channel is ...

Not finding what you are looking for?
Cars & Trucks Logo

1,541 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...