2000 Ford Explorer "camshaft sensor" Questions

...camshaft sensor look behind the intake manifold back next to the firewall the sensor should be their but, i don't no about a pulley but there is a camshaft synchronizer beneath the sensor

...camshaft position sensor on a 2000 Ford Explorer? Where is the camshaft position sensor (cmp) located on a 2000 Ford Explorer 4.0L V6 Pushrod engine? in the rear like where the dist would normaly ...

...camshaft sensor On the 2002 ford explorer the camshaft postion sensor is located on the left (driverside) cylinder head near the top, heres a diagram to show you where its located. hope this

sensor) off the camshaft synchro. You will see a little half moon shaped piece of metal in there. Take your alignment tool and slide it onto the synchro body and the little half moon piece. To get the

...Camshaft Position Sensor is located and can i get to it without having to remove any other parts such as air intake lines or anything like that if you could hook me up with a diagram or picture of ...

...was brittle and broke can you show me and tell what this sensor is i need to see a diagram of the drivers side of the engine of 1998 ford explorer with a sohc 4.0 v6 engine Camshaft Position

to the right end of the manafold you will find the wire to the sensor. To remove it you will need a #30 Torx tool. The camshaft sensor is located almost straight above at the end of the cam. Take care

...sensor camshaft position (CMP) sensor crankshaft position (CKP) sensor mass air flow (MAF) sensor heated oxygen sensor (HO2S) knock sensor (KS)The PCM carries out the following functions: accepts ...

...camshaft sensor that controls when the fuel injectors open according to camshaft position.If this one is bad the fuel injectors wont open and the engine wont get any fuel.It also has a crankshaft ...

...camshaft sensor on a 1999 ford explorer needs to be replaced where is the camshaft sensor located It's located on top of the driverside valve cover next to the oil fill cap, theres a metal clip ...