1987 Ford F 350 "oil pan" Questions

Ad

...oil pan on my f350,got the oil pan lose,but cant get the oil pan out, trans is in the way, do i loosen the trans or motor mount on engine Remove the motor mount bolts and raise the engine slowly. ...

Ad

...oil pan replacement The oil pan has rusted and needs replaced. Ford says the engine must be removed in order to replace the oil pan and takes 14 hours. Is there an easier way that takes less time? ...

Ad

Question about Ford F-350

1 Answer

...oil pan gasket? Drain oil, remove oil pan bolts, drop pan, scrape remnants of old gasket off, attach new gasket to pain using silicone gasket sealer (Permatex) and reinstall & refill w/oil. Some ...

...oil pan that inhibits access through the pan. Please help There are 2 oil pumps. One standard oil pump mounted extrernally and another which is a high pressure oil pump located inside the oil pan. go ...

Question about Ford F-350

1 Answer

oil pan? Remove front tire near the oil-pan. Jack up the truck, and support it firmly on jack-stands. Work your way around the bolts holding up the oil-pan. Usually they are many small bolts/nuts, and

...oil pan... so you must gain enough space between the susp. and the pan to remove the pan.Good luck !we just got done doing the EGR on one of these and it took us 20+ hrs as it is located on top under ...

Oil pan removal problems on my 89 F-350 w/7.3L Diesel I am trying to remove the oil pan and am having a very hard time getting it off. I have the motor jacked up and the tranny jacked up. Is there a ...

Question about Ford F-350

1 Answer

...oil pan on 94 ford diesel non turbo truck .need step by step help ..thanks Remove the starter, remove the flywheel dust shield, remove the motor mounts center bolt, jack the engine as far up as ...

...fiter, I didn't replace the new filter correctly and "tore up" the inside of the filter cap. Where can I get a replacement? Why not just buy a new filter ? or do you mean the oil plug on the oil pan

...oil pan gasket how to change i need to know if the rear rubber goes on the tranny first or can i put it on the pan then put it in thanks scrapndon put it on the motor first with gasket glue just a ...

Not finding what you are looking for?
Cars & Trucks Logo

113 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...