1987 Ford F 350 "motor oil" Questions

Ad

Question about Ford F-350

2 Answers

...motor oil do i need for my ford f350 how many gal if it is a gas engine it should use 5 quarts, unless it has a heavy duty oil cooling system, then it may need up to seven quarts. Fill the motor with ...

Ad

Question about Ford F-350

1 Answer

Motor Oil How many litters of motor oil do I need for a 1987 Ford F350? gas mtr v10 7.5 qaurts deisel mtr 16 qaurts

Ad

...as rpm increase what is it. How many miles on the engine? Replace the oil w/ a 75/25 blend of Motor oil and Lucas Oil Stabilizer.This may help some but I'm afraid the engine needs an inframe

Question about Ford F-350

1 Answer

...are leaking you would experience the oil leaking in to the radiator. The other worse scenario would be that you have a cracked cylinder wall that is leaking motor oil in to the crankcase. Good ...

Question about Ford F-350

1 Answer

...gasket to pain using silicone gasket sealer (Permatex) and reinstall & refill w/oil. Some applications require loosening motor mounts and raising engine a couple of inches to clear cross

MOTOR OIL CAPACITY 1990 FORD F350 5.8 LITER With new oil filter 6 qts. Ok there is a set amount that the truck capacity it can hold. But there is only 1 right way to do this even if you know its specs

Question about Ford F-350

1 Answer

...get oil off. Take a strong light and watch the motor whilst it is running. You should see leak. There is a dye you can buy and put into the oil to help you see the leak better. God bless your

...motor is for oil. Hi Chrisandra11, it is a bad idea to try to bypass this sensor, just replace it,this sensor in many cases is interlinked with with other engine functions, as for the glow plugs ...

oil filter motor quit replaced oil filter and oil was hard to start got started good oil pressure drov for 5 miles now service engine soon light is on any answers ? all fuides ok how does it run power

...oil pan out, trans is in the way, do i loosen the trans or motor mount on engine Remove the motor mount bolts and raise the engine slowly. Don't dent the oil pan when raising the engine! After the ...

Not finding what you are looking for?
Cars & Trucks Logo

113 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...