1986 Ford Ranger 2WD "throttle position sensor 86" Questions

throttle position sensor. Next check that there is no intake leak between the intake manifold and the throttle body housing. Then check vacuum if it's low use some carburetor cleaner to find any leaks

...throttle position switch located on the throttle body. Try unplugging the sensor and drive. If its better you have found the problem. Be aware the truck may feel dirrerent with this unplugged but all ...

Throttle position sensor How can I adjust the throttle position sensor on my 86 s-10 2.8 two wheel drive? there are three wires going to the TPS one is a ground and one is a 5 volt reference the other

...the MAP sensor throttle position sensor relays and have check for broken wires .and replace the fuel pump and filter anybody with any ideas Any codes(what codes got before)could be crankshaft

...throttle position sensor was out of range even on new one had to slot the screw holes to allow proper idle speed . Also vacuum leaks '86 mustang 302ci irregular idle speed. Loose throttle body or ...

...Throttle Position sensor, and fuel injectors. All seem to work. Was told that the issue is then the timing chain. Would this sound right? I have the parts to replace it, but not sure how to go about ...

...crazy- One parts guy said "its prob a sensor thing" Thanks Jeff I have an ' 86, same stuff. Sound like a sensor thing alright. I would check the Throttle Position Sensor and the Mass Air Flow

...FixYa! This can be caused by a bad TPS (Throttle position sensor). I strongly suggest that you have it replaced to resolve the problem. Hope this helps and thank you for using FixYa! Have a good

...This website will let you know how to do this Just copy the link and paste in your ...

...throttle position sensor on a 1993 ford f-150 econoline van where is this part located at on the engine See if this video helps or scares you - DIY Throttle Position Sensor Change 86 96 V8 Ford ...