Question about Ford Bronco II
...i,m i not getting any spark at plugs or the coil in 1988 ford bronco 2 ? there is no spark at the plugs or the coil it just quit running the fuel pump is working fine Spark Control Module Or
...2. I just replaced the head gasket. I got it all put together. I have the timing in the right place. I am also getting fuel. I checked the ignition and I'm getting spark. I know I'm missing something ...
...2 screws. This part sets the spark and fuel for the throttle position. there is a switch for the fuel pump on the passanger side by the glouve box called the intera switch press it to reset the fuel ...
...2 and the engine turns over and i have spark but the engine wont start and it wont even fire. whats my problem ? I take it by this the motor turns over but will not fire. At this point I have to take ...
...2 turns over wont ignite loose distributor is the any other causes and what happens when distributor loose If your distributor is lose than you need to check the timing. Pull a plug out and put the ...
spark plug and cap wiring for 1985 ford bronco 2 had to change wires and went to pull one off and all the wires got mixed up and don't know how they go When your facing the front of your bronco ...
I'm looking for a diagram for a 1989 Bronco II firing order from the distributor to the spark plug 1-4-2-5-3-6 clockwise
i have a 1986 ford bronco 2, 2.9 liter engine it turns over and it has spark but it wont start. whats my problem ? If you're getting fuel check your ignition module.
bronco II won't start fuel pump problems 86 ford bronco 2 won't start changed coil wire acts like it wants to start not getting spark
...2 years without being started. I replaced the plugs, rotor, cap, ran fuel injector cleaner through it several times, checked cylider compression which was all good, checked for vaccume leaks, and ...
116 questions posted
Usually answered in minutes!
79 Questions
354 Questions
233 Questions
196 Questions
176 Questions