1984 Ford Bronco II "plugs" Questions

...on Ford Bronco 2 engine? I just bought a 1989 Ford Bronco 2 with a 2.9L engine. I fixed two freeze plugs, and then noticed a leak coming from another part of the engine. I finally located the source ...

...89 ford bronco 2 with a 2.9 liter it sat around for 2 years without being started. I replaced the plugs, rotor, cap, ran fuel injector cleaner through it several times, checked cylider compression ...

how to installl and replace freeze plug ts very hard to get at with it in the engine. but heres how if you can get at it. take a hammer and u can use a punch to hit the plug on a corner to turn it ...

there is no way to check the rear diff leveal so how do you fill or add if the diff plate was remover? There is a fill plug on the front side of the differential. Look close, it's a flush type ...

...doesn't start at all. Does it turn over and just not start or does it not turn over at all with sll plugs in it? Try to jump start it with another vehicle. Your problem could be a weak battery or ...

...a replacement freeze plug. Do yourself a favor and buy only the brass replacement plug. The steel plugs don't last as long. If you have a seal driver that will fit the inside diameter of the new ...

86 ford bronco 2 no fire to the coil wires that plug into the coil so no fire bronco ran good now no fire to the coil.check for power to plug that goes to coil but no power to them.what could keep it ...

no fire Coil pack. Distributer. Spark plugs. And spark plug wires are all things that deal with the firings of the motor. the distributer cap and rotor may also be bad.

1987 ford bronco 2 turns over wont ignite loose distributor is the any other causes and what happens when distributor loose If your distributor is lose than you need to check the timing. Pull a plug ...

hello, i have a 1984 ford bronco ll, a 3.0 v6. the coil is working, and all plugs are fireing, and we set the timeing on the distributer,and it makes a poping noise and shoots fire out of the carb ...