1984 Ford Bronco II "carb" Questions

what carburator is stock for 1984 ford bronco 2 2.8 liter http://www.hotrodders.com/forum/carb-2-8-l-v6-1984-ford-bronco-ii-132065.html according to the site, a <350cfm holley carb should fit ...

...edition and i have replaved both fuel pumps and it still wont start unless you pour gas into the carborator then when the gas in the carborator runs out it dies you may have a gold coloured filter ...

The "84 carburatored Bronco has only one O2 senser The "84 carburatored Bronco has only one O2 senser which is located near the manifold BEFORE where the cat used to be. Thus the sensor has no ...

carb adjustment After rebuilding the carb the truck started idled high and then eventually stalled like it flooded out, I need to know if anyone knows how many turns the needle valves are supposed to ...

...down and shuts off start it back up does same thing it kinda runs rough to I am assuming it is a carburated engine. Sounds like the accelerator pump is not pushing the extra fuel when required as ...

...I've removed the Cat Conv, installing dual exhausts. I also installed a re-manufactured Motorcraft carb. The result was backing on decelleration. A machanic cured the backfiring but now there's ...

...unit and the inline pump what else should I try? try replacing the fuel filters and cleaning the ...

I have 1988 bronco 2 and it wont crank,can hold hand over throttle body and it stays running as long as i have my hand over it try rebuilding the throttle body carb

...unit, filter and pump (twice to be sure). I checked all the lines and they are clear. I rebuit the carb myself and I'm pretty sure its right but not 100% sure. It gets gas to the mechanical pump but ...

...but im unsure. is it a problem with the timing or spark plugs? it has 28,888 miles Try spraying carb cleaner into the throttle plate an see if it starts ! if it does the fuel system has a problem