1966 Ford Mustang "power coil" Questions

...coil has power and the other wire is ground, the dist is what produces the ground as it spins in order to make the coil spark, the dist grounds and releases ground very fast. if your dist has a ...

...coil-cap and button i know i'm getting power to the points but not to the plugs Hello, I see you have changed all but the condensor? this may be the last item to sort it? Have you tried a hot wire ...

...power. It feels like it's down a cylinder. It is not running smooth. The ''check engine soon'' light is flashing.I've been told it's the coil pack by a mechanic that won't work it until ...

no fire I would check the points and condenser. Also check the coil and coil wire. Also check for power to the coil with the key on. You might have a bad fusible link.

...power to the coil, using the 12v test light. If you are getting juice, check distributor and rotors and all plugs wires. no juice, now you have to trace back why you not getting power to the coil, ...

...power at the coil but the ground signal doesn't fluctuate from on to off while the engine is cranking. If the hall effects switch in the distributor is bad it won't tell the PCM when to fire the coil ...

...on ck for power to coil if power ck coil. if no power ck fuse ck relay for power jump at pressure sensor turn on control to a/c ck relay for signal power if no signal ck control panel if good ck ecm

...or interior has no power put new coil and hooked up correctly still no power any where when i turn key check fuses and fusable links if all good ignition switch under steering column burned ...

...power from ignition coil I have a 1984 Mustang with a 302ci. motor out of a ford f150. I recently took the motor out and rebuilt it. I dropped the motor back in and it wouldnt start, it was getting ...

...6 engine heres a Schematic for you each coil has a different color for signal side from ecm . but all share power supply source. Ecm sends Negative pulses to individual coils to create spark. good ...