1966 Ford Mustang "hook vacuum line trans modulator" Questions

Ad

Question about Ford Mustang

2 Answers

...Hook a vacuum gauge to the line down at the trans,and start the engine.Idle vacuum should be 15-18 psi,and when the throttle is abruptly applied to wide open throttle,vacuum should drop to near ...

Ad

...hook the vacume line up it shifts in and out of gear Either your vacuum modulator is bad or your band inside the tranny is bad. Check for plugged catalytic convertor also. May need to have the tranny ...

Ad

...it might plug in at there is a vacuum modulator on the back (pass side ) of the trans.it will have a small port in the center,(facing rear of car) hook up manifold vacuum to it and it should

hook up a bicycle cable to it and pull it on and off. Also, you should be able to adjust the timing a little so that thing will fire right up, check the timing and make sure the plugs are good and the

...line an hose diagram for 98 blazer had a trans put n a 98 blazer service engine soon light has been on an wont go n 4 wheel dr found hose on top of trans not hooked to anything this hose might go to ...

...vacuum line is hooked up to the modulator,(on the trans. next to the pan u will see a steel line with a vacuum hose on the end.Make sure it has vacuum when running also ,if everything is ok,pull the ...

Question about Ford Mustang

1 Answer

line conects to the transmission. It is a vacuim pump I know it hooks up to the back of the carborator but I am not sure about the trans? It is a 1965 727 On the passenger side towards the back of the

vacuum line hanging under my truck...a friend thinks it goes to the transmission...my truck is not shifting right...but he does not know where on the transmission it goes... its a modulator hose its a

hook up vaccuum lines on a th350 transmission on a 1984 chevy truck with a small block 350 There should be a steel line coming up from under the truck, near the center of the firewall. The under truck

Question about Ford Mustang

2 Answers

...Vacuum modulator. Hook up a mityvac (hand vacuum pump) to the vacuum line at the rear of the manifold. if it holds pressure the modulator is good. if it leaks modulator is bad. this is a less ...

Not finding what you are looking for?
Cars & Trucks Logo

516 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Mustang
1998 Ford Mustang

706 Questions

2000 Ford Mustang
2000 Ford Mustang

694 Questions

2001 Ford Mustang
2001 Ford Mustang

653 Questions

1995 Ford Mustang
1995 Ford Mustang

589 Questions

2002 Ford Mustang
2002 Ford Mustang

617 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...