1966 Ford Mustang "90" Questions

...removed with a 3/8 ratchet (it has a 3/8" square hole in the center). usually a gear lube like 80/90 or 75/90 is used in manual gear

i have a 1990 mustang moter that wont start ya i have a 90 moter n a 99 ranger. the mlter wont start. i think i have the wies right but not shur. not shur of fiering order. Since you didn't list the ...

What's your problem?Hi I have a 90 convertible mustang 5.0. My problem is the fuel pump wont shut off when you turn key on. It runs and runs and car wont start. Ive checked all injectors, changed ...

I have a 90 ford mustang 2.3 and i dnt have the owners manuel what kind of oil does it take for the trans and the other oil?? 5 speed or 4 speed? Manual right?

fan doesnt blow on 2 settings in interior 2001 mustang 3.8 check blower switch, blower motor resistor is 90% always the problem as long as you dont have brunt wires at switch. hope this helps.

I WET MY GEAR BOX ON AN AUTOMATIC 2007 FORD MUSTANG gearbox im taking u mean the pumpkin ya get the water out immeditatly and refill with 90 weight gear oil should be alright

fuel pump runs continously My 90 must fuel pump runs with ignition off it could be a relay stuck open or someone hot wired the pump

what is the wheel lug nut torque for a 2003 mustang 80-90 ft/lbs torque . On aluminum wheels check torque after 200 miles . Then again until they do not tighten.

at a custom shop that dealt with suspensions, we would generally torque the hardware down to around 90-100 lbs. and lock tite them on

my dash board light dont work.. 90 mustang gt Have you tried turning the dimming knob (usually a small knob sticking out of the instrument guage face, or a roller type switch next to the light switch)