1999 Pontiac Montana "remove door" Questions

Ad

Question about Pontiac Montana

2 Answers

remove to door panel On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining

Ad

Question about Pontiac Montana

1 Answer

remove the door panel. First remove the switch plate by prying upward at the rear of the switch plate and unhook the connectors. Then remove the two armrest screws. The door panel then has to be pryed

Ad

remove door panel to replace window motor ALL DOOR PANELS HAVE PUSH CLIPS INSIDE THEM! YOU'LL NEED TO USE A FLAT PRY BAR, OR SCREWDRIVER, PLACE IT IN BETWEEN THE DOOR PANEL, AND FRAME! AND TWIST IT TO

remove exterior door molding pontiac montana I need to remove the large trim piece that runs along the bottom of the door on my 2000 Montana. The door is off and on the bench. I don't want to ...

Question about Pontiac Montana

2 Answers

door panel. you must remove 2 screw in under the door "arm rest" (they're toward the front) you MUST remove the metal clip behind the window crank (those with pwr w/l dont have to worry about this

Question about Pontiac Montana

1 Answer

...door should be small panal located about where the mirror is . remove it and disconnect power to mirror. remove screws or nuts whatever be the case.replace with the new one ...hope this help...before ...

or remove ? 2009 Mazda Tribute left rear door you join the black and yellow wires to bypass. I searched for this everywhere and couldn't find it. I had to eeny meeny miney mo. Now it's on the internet

Question about Pontiac Montana

1 Answer

...housing... You'll need to remove the door panel in order to remove the panel that's right beside the mirror on the inside of the door and remove the 3 bolts holding the mirror down assembly

06 montana chime wont stop out of park all doors shut tight Might have a door switch bad is bad or wiring to one of the switches. I would begin by checking if there are any blown fuses. Would then ...

Question about Pontiac Montana

1 Answer

...continuity thru the connector. The spring contacts in the door can also get corrosion on the back side at the connector, try cleaning them on the outside first before attempting to remove door

Not finding what you are looking for?
1999 Pontiac Montana Logo

728 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...