2002 Nissan Sentra "removing door handle 2000" Questions

Ad

...door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back ...

Ad

...door handle replaced. remove door panel then you will see where the inner door handle is mounted to the door. un hook linkages to handle then find the 2 nuts that fasten the handle to the door and ...

Ad

...door handle on a 2000 Mazda MPV? You have to remove inner door panel, once off carefully remove plastic to gain access to door handle, disconnect wire rod from handle unbolt handle and remove. ...

Question about Nissan Sentra

1 Answer

door handle I'm changing the exterior door handle on my 2000 ford explorer and I can't figure out how to remove the bolts holding it on? I assume you mean the drivers door. You need to remove the door

...door handle Remove the front door trim panel. Peel back the watershield. Remove the exterior door handle access hole grommet from the door. Loosen the screw. The screw must be fully disengaged from ...

...that connects the handle to the door latch. You don't have to take it completely off, just remove where it is clipped the to handle. Make sure the window is rolled up before removing the door

...door handle was and remove another screw just above where the handle was. This screw is holding the panel to the actual door. Pop the cover off for the automatic door locks and disconnect them. Lift ...

Question about Nissan Sentra

2 Answers

removing front passenger door panel to repair power lock. There is a triangular piece, at top corner, covering a screw behind the mirror. Remove that screw. Remove the piece that covers the handle and

...door handle that releases the latch seems to be keeping me from removing the entire panel. There is a surround piece around the handle that I am afraid I will break if I put any more pressure on it. ...

...door handle mounting screw. 7. Disconnect eight retainers around outside edges of door trim panel using clip zip tool No. J-36796, or equivalent. 8. Slide door trim panel upwards to release alignment ...

Not finding what you are looking for?
2002 Nissan Sentra Logo

1,247 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...