1997 Nissan Maxima "perfect vacuum manuals" Questions

perfect working order and vacuum hose are correct routing and no crack but engine light is still on please help cant pass inspection for 4 mounts If your map sensor is bad, it will also cause p1447 to

vacuum hose running from a port in the intake manifold to the control valve on the left side wall of the engine bay. (Hint: if you've got a car that came with Autostick and that someone's converted to

...vacuum line in a glass of water and let it slowley **** up all the water, then I poured seafoam into the intake).If I adjust the idle screw high enough to stay at about 1800 rpm it will idle perfect, ...

...vacuum leaks at the gasket surface of the intake manifold and also try try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not ...

...vacuum hoses/1988 jeep comanche pick-up 6 cy. They were disconnected & now we are unable to re-hook them back up in the proper way they are supposed to be. The engine is making a whistling sound & ...

...perfect vacuum can be held. Is the vacuum switch bad? It is brand new from Ford, The electric (ground) current to the vacuum switch only stays on for a short time. During this time the 4 wheel drive ...

...vacuum hose reconstruction I removed the top intake manifold and can't remember the hose configuration please help I recently tried the DIY service and repair manuals from a website and it actually ...

...and I now had a strong steady vac signal down at the actuator. Retested the system and it worked

...say is an intake vacuum problem, but after they say that and put my Jeep back together, it runs perfectly well The mechanics check all of the hose connections and say there aren't any loose ...

...perfect when driving normally car has done 117000 miles Find another shop. The problem is in the vacuum system, most likely with the vacuum advance. If the car dies when idling in gear there is a ...