...& turn motor over, that's it. Still tight-- then you have to check for ball joints, or steering rack Should be changing power steering fluid every 3 years, as well as transmission or they both ...
...tight. One answer i got was to rotate wheel and try again. I think the clock springs are the issue. Is there any thing else I can try besides pulling the steering wheel off? 2002 Grand Cherokee ...
...tight, truck pulls left after left turn, pulls right after right turn It sounds like you have a bad balljoint or rack and pinion. Another possibility is upper strut bearings. What is happening is ...
Question about Ford F-150
...steering column shaft tight on the rack and pinion stub shaft. This coupling may have gotten loosened, so you should check it. It is all hidden by the boot over the steering column on the floor. If ...
turn signals working! I'm a single mom of two children on a tight budget and cant afford to just take it to a shop. I have a good friend willing to fix the problem, if we can figure out how to. Please
...tight enough. Now, THAT being said, there MAY be yet another issue going on. While I don't doubt for a minute that you need 1) a new serp. belt, 2) a new tensioner pulley, and 3) a can of belt ...
Question about Cars & Trucks
...turn tight corners? The steering shaking means there is a vibration somewhere between the road wheels and the steering wheel. A common cause for the noises and vibration is a warped brake disc. Even ...
...steering wheel is not horizontal it shows a possible toe-in problem, as can wandering. What condition are the tie rod ends and ball joints? Be sure everything is tight before doing anything else. If ...
...tight fit where it is located, but after doing it for years, I have a few tricks-drain the pan and then get a filter wrench around the housing, turn clockwise until you can get it off by hand-there ...
4,114 questions posted
Usually answered in minutes!
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions
974 Questions
