...switch and the solenoid. When you bypass the switch with the screwdriver you don't ground out the line, but with the switch the ground shorts the circuit, blows the fuse, and then won't start the ...
...switrch is connecting well and not carboned up. Check the juice from the switch to the solenoid and look for breaks or corrosion. check the ground from the solenoid, clean and check with
solenoid and ignition switch is new Using a jumper wire, connect the S. terminal on the starter relay to the battery connection on the relay. the starter should engage. if it does not, your problem is
1998 for f150 pick up i can not get 4x4 to work, it seem that on the shiftion vacums solenoids, there is no ground Check the vaccuum lines at the front axle. Also check the vaccuum motor that controls
solenoid,there should be a group of wires attached with the battery cable,one,or two of these all fusible links,one maybe burned into.Pull on them,if one of them is burned into,it will pull apart like
switch. Then put it into neutral and reassemble everything. I figure it's related to something electric but I cannot track it down. I've checked fuses 13 and 15 also. Please help. Probably a bad shift
...switch thanks so much on that info we have 1998 ford f15 we replaced the ignition and it still wont start the truck,, the key turns over now and the radio and everything comes on but it wont start, ...
actuator motor barely moves when trying to lock in 4x4. not sure if vacuum switches are bad or if its the actuator or what. Could be a problem with leaking vacuum lines either from the vacuum ...
...for a few minutes, then it switched back to 2wd. Can the switch be tested? Sounds like the shift ...
...1998 Ford F150,4.6L into 4X4 mode, when I heard a large ''clunk''. Ever since, my 4X4 doesn't work. Help! I would start with checking the vacuum solenoids on the front axle, and the vac diaphragm. ...
4,114 questions posted
Usually answered in minutes!
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions
974 Questions