scraping/grinding noise around the flywheel, more so when I accelerate. Take off Trans Dust cover and inspect, See if there is any damage to the Trans dust cover? See if starter has to be shimmed? See
Scraping noise when off gas and clutch is out I have a new ACT clutch and New lighweight flywheel, in higher rpms when you are off the gas it almost sounds like a fairly loud rattle/scraping. Best ...
...scraping on your flex plate if you have an automatic transmission. You may of messed up your flywheel like Scargo said. But before you do all that, there are shims you can get for the starter. The ...
...scraping noise and then car starts.i'm scared whats the problem the gear on the flywheel has worn. the engine stops in one of four spots in the rotation 'cause the cylinder pressure is building. That ...
Question about Ford F-150
...anyone tell about the problem and solution scraping voice and it reduce when push clutch paddle Pressure plate has broken. Time for a new clutch package. Have the flywheel turned or replace it
Question about Cars & Trucks
scraping/grinding noise and dosnt crank or start vr commmodore v6 auto Starter bolts are loose, or starter components may need servicing; probably bendix drive plunger / starter solenoid stuck, out of
...scraping some part,,,how long since new parts installed?? not real expensieve,,but moderate amount of money., if you do it yourself. some have inspection plate you can see a little around flywheel ...
Scraping nosie evertime i hit accelerator I just got my 96 volvo 850 back from the shop were a new clutch was installed. When i drive now i put it in gear and evertime i hit the accelorator it makes a
Question about Ford F-150
...scraping noise when I start it. Could something be loose on the starter? How would I repair it? 1999 Isuzu Rodeo LSE V6 2WD. sounds like your starter is getting bad. If the starter was recently ...
Question about Ford F-150
Flywheel or something grings against the starter when clutch is engaged My the metal on the starter where the fly wheel engages was worn down.The problem was when I pressed the clutch I could hear the
4,114 questions posted
Usually answered in minutes!
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions
974 Questions