...change the voltage for the 4x4 selector. Myself, it seems strange because the lightbulb is off until the headlights, etc. are turned on, so it would make no sense to effect the 4x4 selector during ...
...power to the solenoid. For the 1 wire style, if you put on a Voltmeter and turned the shift Selector with the power from the truck active, you could see if the Voltage changed at each Selector
...shift selector of my Nissan Do not light up. The letters on my shift selector of my Nissan Sentra 2007 do not light up. What should i Do? If the fuse is the problem, then what is that fuse called? ...
...change our gears. If it's a flood shift under the pad where it reads P-R-N-D-2-1 will be a small light bulb under that, your will have to remove the shell to get to it, not very hard job to do. hi ...
How do you change a gear shift light bulb in a 1983 Jaguar XJ 6? the illumination for gear selector is a fibre optic system the bulb located under the centre console
Question about Ford Cars & Trucks
change out as well .no luck of them working . Can you help me Check the harness first, then check to make sure the switch that activates it is adjusted correctly. If an automatic transmission it
...shift there is a switch that tell you that you are in reverse and kick the back up lights on it could have went bad. It's the transmission neutral safety switch, or range switch. It's located on the ...
Question about Ford F-150
shift solenoid had set values to extend and retract the solenoid plunger. Often, a burned out light in the inside Selector switch on the dash would affect the Voltage sent to the solenoid.
...change the relay and when I started the truck again the same thing append the light on the dash came on started to flash and went off and never came back on anymore.And my daytime lights are not ...
4,114 questions posted
Usually answered in minutes!
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions
974 Questions
