2004 Ford Explorer "clean corrosion" Questions

...clean.after the corrosion is off take a wire brush and brush terminals and connectors then reinstall. this should resolve your problem. if you have a pool, alkalinity increaser would work as well to ...

...clean and corrosion free. To check the engine ground is satisfactory get a heavy jump cable and go from the batt neg terminal to a good clean metal part of the engine, a bracket or heavy casting etc. ...

...corrosion, this is normal and fine. Just scrub it clean. Once clean, tighten the connection with a socket wrench. You may also be having battery issues. If its been a long time since a new battery or ...

...on, the wiring harness for a trailer is corroded, what to do? check for a corrosive bulb sockett, clean the sockett up , bad ...

...sometimes engine turns&cranks but wont start.if I try a few times it will start You need to clean the battery teminals of any corrosion and re-install then tighten the starter end of the

My explorer 2004 wont start I change the altenator n the starter and still wont turn on ... Has the battery been tested? are the cables clean and free from acid corrosion? Do the above checks

...what could be some possible reasons ? Corrosion on wheel inner rim Tire has to come of rim,rim cleaned & tire remounted,balanced & leak tested Try tightening the valve stem first Stem

...clean should be your answer. After two years a battery will not be in good shape and corrosion will have occurred between the terminals between battery and vehicle. Have battery checked and ...

??? any ideas???? i would check wiring.....make sure that both the ground and teh positive posts and wires are free of corrosion.....if they have corrosion clean and repair it....should be an easy fix

if the serpentine belt is still connected,look at the battery and if there is corrosion around the terminals,take them off and clean them really well,but do not get that stuff on your hands or clothes