2004 Ford Expedition "replace ac compressor" Questions

...ac blows cold initially after being off for a while, then heats up, and continues to regularly cycle back and forth between hot and cool air, then the system may be low on refrigerant or the ...

...replace. Use ac die to check for leaks then charge. reinstall dash after no leaks. This repair I do not recommend for the novice or semi novice mechanic as you can do more damage trying to replace a ...

ac works for a little while and then blows a fuse The blower motor is bad,or the clutch coil on the ac compressor is bad,replacement of the clutch coil assembely,or new compressor will fix the problem

...ac is blowing but its not cold! How can I tell if its the compressor? Could it just be the a/c clutch and can you just replace the clutch on a compressor? If so how?? Hi Kaseyloe, I think that the ...

...AC Failure.. Repalced Fuze Box, Compressor Clutch, Pulley, Mag, Diode on test the High side is 450...Low is 60...134A AC ran for 5 min after replacing Clutch, Mag & Diode then Compressor quit ...

AC Compressor only coming on intermittently 2005 Ford Expedition had almost all of the AC system recently replaced due to a compressor shredding and sending metal through the whole system. System ...

...AC stopped blowing cool air and began blowing warm air. We had refrigerant put in and it blew cool for a few days and then it started blowing warm air again. We then went to the dealer and they said ...

...ac's literally stop. I've been told it's the compressor. Does that sound right? Hi,it maybe the a/c filter which is blocked and will be needed to replaced or to be cleaned. Thanks for using Fixya ...

...AC fuses for 2006 Ford Expedition I'm getting the compressor replaced. Mechanic doesn't know where the AC fuses or AC relays are and I can't find manual. Help! Which one is it they are located in the ...

...ac compressor on a 04 expedition with front and rear ac? When replacing the compressor the dryer should also be replaced, you put 2oz of oil in compressor and stand compressor on pulley for 5 min, ...