2002 Ford ZX2 "tension pully arm" Questions

Ad

...pully tensioner need to know where to lossen trying tpo change alternator Use a 13 mm wrench and turn the tensioner bolt like you are trying to tighten it. This will swing the arm away from the belt ...

Ad

Question about Ford ZX2

1 Answer

...tension off the tensioner pulley. This is my problem. How do you do this? What tools are required? The tensioner pully is a spring loaded arm and pully that rests against the belt. You will find a ...

Ad

...pully so that the pulley moves away from the belt. It should pivet in one direction only. Watch the tension in the belt go slack. Then as you keep the pressure on the ratchet with the pulley fully ...

...pully. on this tensioner, you can often fit a 3/8 drive ratchet directly in the back. if so that how you'll be able to release the tension on the belt. otherwise use a socet (if there's enough room) ...

Question about Ford ZX2

1 Answer

...pully which is attached to an arm the is spring actuated. the easiest way to find it is to lay under the vehicle and push up on your pullys until you find which one moves. it shouldnt take much force ...

Question about Ford ZX2

1 Answer

idler pully on serpentine belt belt is loose on pully and making noise Your tension spring is shot. purchase a new idler  pulley  and tension arm bracket. that should fix it. 

Question about Ford ZX2

2 Answers

tension. Spin all of the pullies with the belt off and check for roughness that would indicate a bad bearing. A bad bearing will cause the pulley to tilt and make the belt come off. You can also check

Question about Ford ZX2

3 Answers

...pully you will have. Look for the "pulley" with a small arm with another belt router on the end. Should look like this " 0--0" Two circles with an arm connecting them. If you see none than some cars ...

...put it on the center tensioner pully arm. now with the belt on except for the alternator torque the ratchet pulling the tensioner pully giving you enough room to put the belt on fully. ~Dan

...? The Belt squeaks when accelerating, the mechanic says the tensioner pully is out of alignment... how do we fix it so it doesn't cost me an arm and a leg? I think , only way is to replace

Not finding what you are looking for?
2002 Ford ZX2 Logo

281 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2003 Ford ZX2
2003 Ford ZX2

153 Questions

2004 Ford ZX2
2004 Ford ZX2

10 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...