2002 Ford Taurus "code crankshaft" Questions

...code P0385 refers to Crankshaft Posistion Sensor "B", whereas P0335 refers to Crankshaft Position Sensor "A". If you have the code P0385, your vehicle is equipped with two crank sensors (CPS). Other ...

...code may include: Damaged or defective Crankshaft Position Sensor (CKP) CKP sensor wiring or connector fault Read more at: https://www.obd-codes.com/p0316 Copyright OBD-Codes.com Common Problems That ...

2002 ford taurus Code P0316 means 'misfire detected first 1000 revs.' check the crankshaft position sensor for voltage surges when trying to start the car, if no voltage spikes then replace the sensor

...code means the camshaft and crankshaft are not synchronized. In general, in old terms, the timing mark on the camshaft and the timing mark on the crank are not lined up. This means the valves are in ...

...code may include: Damaged or defective Crankshaft Position Sensor (CKP) CKP sensor wiring or connector fault Poor fuel quality Ran out of fuel Ignition system malfunction Fuel system malfunction: ...

I have 3 codes. P0172, p0316 and p0316. It is misfiring under 1000 rpm. after 1000 rpm it runs great p0172 Basically this means that an oxygen sensor in bank 1 detected a rich condition p0316 ...

car will start drive it for awhile turn it off and it wont start battery is fine let it sit 15 mins. and it will start See what codes are poping up like crankshaft sensor

...ford taurus ses? got a code P0340 and advance sold me the part - I just gotta figure out where it goes Look at front of engine, attached to timing cover down near crankshaft pulley, if it's 3.0L

...and There was loss of power. Then all at once everything came back on. What is now,any lights,any codes,sound car quit and came back.could be crankshaft

...First, if able to, get it to Autozone or Advance and ask them to read your computer problem codes (this is free at most locations). Some potential problems are: If you are also getting a ...