...reverse if I dont go to 1st gear and then to rev. first. Sounds like the shift lever is not coming completely out of 2nd gear. So, by shifting into 1st gear, you recenter the shift lever. You can ...
...transmission it is the one located toward the rear of the transmission not the one towards the front that is the 1st/reverse band adjust replace the modulator if problem persists sometimes they ...
...reverse just fine, but when it comes to shifting into Drive, 1st or 2nd the truck will only rev. No sounds coming from the tranny. Problem appears to be independant of the reverse gearing. she's ...
...hard from 1st to 2nd transmission shop says tranny is fine ford dealer reprogrammed PCM may need to have the kickdown band adjusted. it is applied when the trans goes into second gear and in
...Reverse and to Drive, but wont shift through the "Drive" gears, and seems to be stuck in 1st or 2nd gear. What makes the transmission shift through the drive gears? Could it be the modulator valve? ...
...reverse, 1st, or 2nd gear P1249 does NOT appear in any of my charts or troubleshooting information. The codes in the P1200 section are for fuel delivery/mixture. Are you sure that code P1249 was ...
reverse an 1st. clutch pedel engages halfway to floor or at floor, sometimes unable to start truck. see no leaks, fluid levels r up. slave replaced last yr, master cyclinder fixed this year.... air in
...reverse fine but only limps in 1st gear no shifting Could be TCC solenoid, or something similar. Check computer for trouble codes. Even though it's transmission related, it will still trigger a check ...
1st and reverse. grindin in reverse and hard to get into first. what do u think needs new clutch. before i come to a stop at a light i have to put into gear or it will be really hard to get into gear.
1,106 questions posted
Usually answered in minutes!
907 Questions
546 Questions
442 Questions
465 Questions
399 Questions
