mount (upper end) in place. DO NOT remove the single large nut at the top of the strut assembly. Wiggle the strut assembly out. Slide the new strut assembly in bolt it back in. Put wheel back on. Done
...top. you will have to remove the battery and the bracket and also airbox, next is to raise the car and remove the wheels and then seperate the lower balljionts on both sides, remove the axle nuts and ...
...Remove steering gear from Bench Mounted Holding Fixture and place on bench. Install power steering hose bracket and retaining bolts at top of steering gear. Tighten to 9-12 Nm (80-106 lb-in). Install ...
...Top RH" are moulded into the stabilizer bar link for correct assembly to the front shock absorber strut. Install new nuts and secure stabilizer bar link assembly to front stabilizer bar and front ...
...top of the strut that mount it to the inner trunk and 2 bolts and nuts that mount it to the spindle assembly at the bottom of the strut.then you can remove the strut from the car.compress the spring ...
...top of the switch. Remove the two neutral switch attaching bolts, then remove the switch. Fig. Fig. 1: Neutral safety switch location-vehicles equipped with automatic transaxle Fig. Fig. 2: Adjusting ...
...top bracket for the side mount for the bumper. This is the same size nut as the one to remove the lights and looks identical to the previous studs for the lights. Moving to under the bumper. Look for ...
...remove or disconnect the following: Windshield wipers Cowl extension Emission vacuum control connector at the right side of the dash panel Hood Steering column pinch bolt Mass Airflow (MAF) sensor ...
...rear diver side tire is tilted inward at the top what can that mean. on a 2000 Ford Taurus. If your car is front wheel drive, this probably means one of three things. 1. Your axle is bent, and you ...
3,307 questions posted
Usually answered in minutes!
2,262 Questions
2,120 Questions
1,869 Questions
1,431 Questions
1,365 Questions