...lever to turn on the turn indicatiors, but alot of the times, they will just start working while im driving down the highway and havent used them for several days This is caused by a short in the ...
...the connector, if no loose anything and you get lights to go on by jumping the switch, replace the multifunction switch (that's the lever on the left of the steering wheel, in case you were
...and on when you tip the turn lever. if all else fails, head for the multifunction switch behind your steering wheel inside the column that your turn signal/wiper/cruise control lever is connected
multifunction switch did not work. guess I'll keeping looking. Only way to keep high lights on it to hold lever back otherwise neither low nor high work at all. If you have a 1999-2011 Mercury Marquis
Question about Buick Cars & Trucks
...multifunction lever. The turn signals will operate only with the ignition switch in the RUN position and will not operate during hazard flasher operation. When the ignition is turned to the RUN ...
...if there is any easy fix for this issue??? The truth is you have three options to fixing your multifunctional switch, you can either replace for a brand new one wich will run you about $250 or ...
...lever can control lots of things, turn signals, bright headlights, flash to pass, not sure that's all, maybe the wipers too. so gm calls that thing a multifunction switch. can you change it yourself? ...
...to test the pressure on the Master cylinder to see if the Master C is fully releasing. The MFS, multifunction switch is the turn signal stalk. All of your signal lights go through it. If you have ...
...common problem is the combination/multifunction switch (the turn signal lever), I'd be willing to bet that's your problem. I've run across it QUITE a few times and it always seems to be the
3,307 questions posted
Usually answered in minutes!
2,262 Questions
2,121 Questions
1,869 Questions
1,431 Questions
1,365 Questions