1999 Ford Taurus "control controls cruise fuse" Questions

...controls the cruise control. It also powers the horn so check your horn. If it works then check the cruise controls ground. If the fuse is good BUT the horn still doesn't work, then check the horn ...

cruise control work on a 2005 ford taurus but the cruise light comes on The first thing to check is the tail lights. The cruise control will not work if any lights are out. Changing to LED tail lights

cruise control won't work on my 2004 ford taurus. There should be a fuse specifically for the cruise. Look in the owners manual to find out where your fuse box is located, then there will be a diagram

...cruise control problem, with my 2007 ford Taurus wherein the cruise control will not engage when the set button is pushed what would be the most likely reason? check fuse, relay, cruise control motor ...

...cruise control doesnt work My car did a very similiar thing, but only a few times in the same day. I turned teh car off, then when i restarted it i hit the gas and the idle returned to normal, has ...

...control in my 1994 Taurus GL has been working intermittantly, now it has ceased to work at all. Is there a fuse that controls this section, I cannot find it in the manual diagram of fuses. What might ...

...LIKELY RELATED TO A SWITCH ON YOUR TRANSMISSION CALLED AN INTERLOCK SWITCH WHEN YOU HIT THE BRAKES CRUISE CONTROL POPS OFF THE SYSTEM WORKS WITH ANTI LOCK BREAKES AND SHIFTER PISITIONAND CRUISE ...

...Cruise Control. I just replaced the Vehicle Speed Sensor and that fixed the spiratic shifting and the MPH Gauge. What else could it be. Thank you 1. Have you looked at your owners manual for location ...

...cruise control not working the buttons on the left side of the steering wheel work which are the on and off buttons but the buttons on the right side to set the cruise do not. thanks... I would get ...

...cruise control aren't working were are th... Horn and cruise control aren't working were are the right fuses for them located. Have someone check the clock spring. Both of these run thru the clock ...