1999 Ford Taurus "change back brakes pads" Questions

change the pads I can not get the piston to go back far enough to put the new ones in. How do you get the piston to push back in order to put the brake pads in? You will have to use a c-clamp or brake

back into place, we tested the brakes. the brake wouldnt stop the car only when u step the brake all the way down the car will slowly stop. we replace the brake booster, but not the master cylinder it

...scored or have deep ridges in them, from worn down brake pads, when brake pads wear down to the metal backing plate, they will leave a ridge in rotors. or deep grooves. change rotors if they are

...change back brakes Remove tire remove drum replace brake shoes by removeing springs with spring removal tool while apart lubercate adjuster have drums turned at local parts store or replace drums ...

take a pair of big channel locks or c clamp,,& push the piston back into the caliper,,if it doesn't move,, you mite have to change it,,when done snap the master cyl cap back on ,,,hoped it helped,

back into the caliber. You need a special tool for rear pads. The pistons have to be turned in, there is either slots or holes in the piston for the tool to fit in, then just turn the piston clockwise

back. May have to change O-ring seals on caliper. Hope this helps. good Luck This help is free...Please make time to rate me Yhanks Not hard to compress caliper piston You open the bleeder as you turn

...back into the lines.When one person pumps the brakes, after several pumps hold the pedal down as far as it will go and keep pressing to the floor as the other person loosens the bleeder valve.  ...

how to change brake pads on a ford transit you should be able to this with both eyes shut and one hand tied behind your back.Great van a transit

...change my front pads on my 92 taurus. but i could not figure out how to get the caliper off to put the new pads on. could you tell me what to do? You need a socket with an allen/hex bit. Not sure ...