it failed on the road and could have killed driver or another .there are a number of joints in this area that contribute to this sympton,they all need correct inspection.steering rack or box,rack ends
...area again with the wire brush. Do the same to the connector lugs if they are burned. Now clean EVERYTHING again with denatured alcohol and you are ready for the final bit: use Silicone Dielectric ...
...area overlooked by many mechanics, but should be checked at every time a brake job is done. Most mechanics will do a cursory glance of the outside rubber sheath, but will not remove the lines, and ...
area around the base of the plug, and allow it a few minutes to work. 5. Using a spark plug socket that is equipped with a rubber insert to properly hold the plug, turn the spark plug counterclockwise
...and molten iron is poured in, forming the engine. This is why engines have a rough texture on most areas: this is the texture of the sand used to cast them. There have to be "cylinders" made of sand ...
...and molten iron is poured in, forming the engine. This is why engines have a rough texture on most areas: this is the texture of the sand used to cast them.There have to be "cylinders" made of sand ...
...area clean and organised, taking photos of the timing system will make your life easier when it comes to re-timing the engine. Water Pump Replacement (2.4L) Removal Procedure Drain the coolant. ...
1,122 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions