1999 Ford Explorer "drivers seat belt keep locking" Questions

...seat belt to release the lock,. The light signal for seat belt, is on your gauge panel, when it lights up even though you have locked the seat belt the beep will be activated. That means either the ...

...drivers side seat and the seatbelt will not let me put it back up. The seatbelt will not release and recoil to allow the seat to come up. It acts as if the seat belt is locked and something will not ...

...seat belt way to fast to buckle up and got pissed off and started pulling even harder now the seat belt will not come out at all, is there a way to unlock it? I've tried the little button inside the ...

...Seat Belt bolts require a large TORX bit. You might also need an impact wrench to get the seatbelt bolts out. I have seen people rip the seat back away from the bolts as it is only paperboard between ...

...seat belt reminder. The relay is located behind the cover over the drivers feet (easily removed, just a couple of torx screws, no breakable interior clips). The central locking relay and the alarm ...

...monitoring,i think you have a switch on the drivers door pillar behind the seat belt,press it when you get out to see if it stops the alarm going off...the tone can be ajusted with vcds ...

Seat Belt Tensioner Igniter; Driver Side (N153) 32-10 - Resistance too High - Intermittent 00655 - Seat Belt Tensioner Igniter; Passenger Side (N154) 32-10 - Resistance too High - Intermittent 01217 -

seat belt. The BCM sounds the chime when receiving an input signal such as opening a door or fastening the driver seat belt when the BCM is in the diagnostics mode. If the BCM does not sound the chime

cars have a belt release button in the door frame . When you open the door the button releases the seat belt. Check to see if your vehicle has one. Make sure it is not stuck or broken. Hope this helps

...seat belt. The BCM sounds the chime when receiving an input signal such as Drivers door, Passengers door opening or turning on the courtesy lights when the BCM is in the diagnostics mode. Make sure ...