1999 Ford Explorer "constant 12 volt connection stereo" Questions

...constant 12 volts a ignition 12 volts and grounds. now your radio ground might be connected to the park light wires of the car. that wire will should grounds ( - ) but when you turn on the park light ...

constant 12 volt power source. Hooking it up to your ignition wire will only give the stereo power when your key is in the accessory position or in the running position. The constant power source that

...The orange wire in the car harness is a constant 12 volts. To resolve connect the 12 volt power supply from the head unit to a switched circut at the fuse block and this will resolve your

them. My new stereo only has RED (ACC 12 volt), BLACK (GROUND) and YELLOW (CONSTANT 12 volts) to match these to. I can help you with 1 wire. The one with the 3 lines connected at the top is the ground

...12 volt positive feeds one is a constant that many times is fused by the same fuse that feeds the lighter socket but also many times only one of the fuses on the fuse chart will mention the stereo ...

...stereo out of the car to 12 volts,and using a speaker make sure you have sound coming out.the yellow wire which is the clock/memory is a must to be connected to constant 12 volts or no sound can ...

...12 volt) or in the ground wire which is black it need a good constant connection on all three to operate correctly. you can temporarily try running a wire directly to the battery and hooking yellow ...

should be reversed with the brake RELEASED. If the DVD played with 11 - 15 volts on the wire, connect it to a constant 12 V source. If it played with 0 to 1 or 2 volts, connect it to ground. Good luck

...constant 12 volts to allow eject without key & keep memory etc.) * Accessory (turns on radio when ignition is turned to acc or on) The battery is typically a yellow wire and the accessory is ...

...Constant - blue/yellow, acc - gray, ground - brown and it won't come on. Radio fuse (top center 15 amp) is good, what else could be wrong? You have it right. Use a 12 volt test light to see if ...