1998 Ford Taurus "throttle position" Questions

...throttle position sensor on a 2004 changing throttle position sensor on a 2004 taurus Removal & InstallationDisconnect the negative battery cable. Disconnect the throttle position (TP) sensor ...

throttle position sensor must be installed on the throttle body using the required method or the idle speed will likely be excessively high. Beginning with the battery negative cable disconnected from

...throttle position sensor in a 1998 ford taurus The location of TPS is to the left air filter / intake duct which attaches to the throttle body.You will see a small rectangular black box ON the ...

...to clean my 2001 Taurus throttle position sensor The throttle position sensor itself is sealed up and can't be cleaned. Might it be the Mass Airflow Sensor or Throttle plates you are refering

...throttle Position Sensor its on the left side of the throttle body its being held by 2 Alan wrench screwed replace that and then take off the air flow hose from the air ...

...position sensor has a notch which is where the butterfly throttle shaft is inserted. You can detach the throttle cable and check for binding. You want smooth movement. Then see where the remaining ...

...throttle return spring...and cable bracket...Remove spark plug wire retainer...Remove wiring harness from intake manifold support and position out of the way...Release fuel injector wire harness from ...

...throttle position sensor (TPS): OBD2 Scanner: Use an OBD2 scanner compatible with your car model. Look for the throttle sensor reset feature in the scanner. Follow the scanner's instructions to reset ...

throttle position sensor and the idle air control valve on automatic transmissions. If the position sensor starts to fail you will have usually high, low, or erratic throttle and it will act as if the

Throttle Position Sensor They all better be on the throttle body, on most vehicles Follow the throttle cable to the throtle body.The throttle cable is connected to the throtle shaft. The TPS is on the