...wipers are not working right. They will run in the low speed and high. But they will not park or run in intermittent settings. We check the motor it is ok. Is there a wiper control unit some were in ...
Question about Ford Explorer
...wipers work like they are suppose to, but they will not turn off. I must turn engine off then back on an then they go to rest! Does it have a Wiper Relay? I bought a new motor and pulse board, ...
Question about Ford Explorer
wipers quit working low speed & delay, wont park. work fine high speed. have changed sw, didnt help wipers quit working low speed & delay, wont park. work fine high speed. have changed sw, didnt ...
Question about Cars & Trucks
...wipers. WIPER/WASHER SYSTEM DESCRIPTION The body control module (BCM) controls wiper motor low speed operation. The washer pump and high speed operation are controlled directly by the wiper/washer ...
Question about Pontiac Cars & Trucks
...wipers work fine in all other settings. Wondering if it is the PCB or perhaps a physical problem? You didn't take into account the wiper switch is a input to the BCM - body control module ,or do you ...
...Wipers Work Intermittently My windshield wipers work intermittently. I've replaced the motor and the wiper switch. I've tested power to the switch and it fluctuates but I rarely get the full ...
Question about Ford Explorer
...wipers working good, all of a sudden they quit! I drive for 15 min, check again, they work for a while, then quit again...what in the problem? If your not familiar with automotive electronics an ...
Question about GMC Cars & Trucks
...wipers work sometimes and sometimes they don't. Are there any common reasons for this Lose connections , Switch , BCM - body control module , wiper control relays . wiper motor going bad etc.... ...
wipers work . Are you familiar with automotive electronic control modules ? The Wiper/Washer System consists of the following components: • Windshield wiper/washer switch • Body control module (BCM) •
...work? windshield wipers with rainsense do not run. No wipers at all , hi , low , delayed ? You really need a factory scan tool to diagnose this problem , there is a lot involved ! The switch , BCM , ...
4,510 questions posted
Usually answered in minutes!
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions
1,369 Questions