...T90T-9550-S) Relieve the fuel pressure; refer to Pressure Relief in this section. Disconnect the safety clip from the male hose. Install the fuel line disconnect tool and push into the fitting. ...
T90T-9550-S Removal CAUTION: Do not mix Standard (green) Coolant with Extended Life Coolant (orange). If mixing occurs, drain engine cooling system and refill with originally equipped coolant type. If
...T90T-9550-B (5/16 inch) or T90T-9550-C (3/8 inch) to coupling so that tool can enter female fitting. Push the tool into female fitting to release the retaining fingers from the formed male tube end. ...
...T90T-9550-C). Raise vehicle on hoist. Remove lower transmission oil cooler tube clips. Remove lower transmission oil cooler tube using 3/8 inch fuel line disconnect tool 310-041 (T90T-9550-C). Remove ...
...T90T-9550-B or tool supplied on vehicle. Tool is located 254 mm (10 in.) behind fuel filter. Place in glove compartment after use. Install new retainer clips in each connect fitting. Remove fuel ...
...supply return and vapor tubes at push connect fittings using Fuel Line Disconnect Tool Set T90T-9550-S. Disconnect electrical connector from the fuel pump module. Remove fuel tank from the
...T90T-9550-S Removal Drain engine cooling system. Refer to Section 03-03 . Loosen drive belt tensioner (6B209) and remove drive belt (8620). Refer to Section 03-05 . Raise vehicle on hoist. Refer to ...
...T90T-9550-5) High-Lift Transmission Jack 014-00942 or equivalent Removal WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related component. ...
4,510 questions posted
Usually answered in minutes!
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions
1,369 Questions
