1998 Ford Explorer "starter install" Questions

Ad

...Install the starter solenoid connector by pushing it straight on. Ensure that the connector locks in position with a notable click. Install the starter cable nut to the starter solenoid B-terminal. ...

Ad

Question about Ford Explorer

1 Answer

...Install the New Starter Step1 Position the new starter in the correct location and install with the mounting bolts. Torque the mounting bolts between 15 to19 foot pounds (21 to 27 Nm). Step2 Push the ...

Ad

Question about Ford Explorer

1 Answer

...Install the starter solenoid connector by pushing it straight on. Ensure that the connector locks in position with a notable click. Install the starter cable nut to the starter solenoid B-terminal. ...

... On all models, disconnect all electrical connectors from starter motor. Remove starter motor attaching bolts. Remove starter. Reverse procedure to install. drive safe pls dont forget to rate ...

...starter. To install: Position the starter motor against the engine and install the mounting bolts. Tighten the mounting bolts to 15-19 ft. lbs. (21-27 Nm). Install the starter solenoid connector by ...

Question about Ford Explorer

3 Answers

...Install starter cable nut to terminal. Tighten to 11-13 Nm (91-122 lb-in). Replace red safety cap. Lower vehicle to floor. NOTE: When the powertrain control module (PCM) (12A650) is disconnected and ...

Question about Ford Explorer

1 Answer

install starter Open the hood and locate the starter attached to the transmission bell housing. To inspect and remove the starter, it may be necessary to work under the vehicle. Park the vehicle on a ...

...Install the starter solenoid connector by pushing it straight on. Ensure that the connector locks in position with a notable click. Install the starter cable nut to the starter solenoid B-terminal. ...

Question about Ford Explorer

1 Answer

Install starter cable nut to terminal. Tighten to 11-13 Nm (91-122 Lb-In) . Replace red safety cap. Lower vehicle to floor. Connect battery ground cable. NOTE: When the Powertrain Control Module (PCM)

Question about Ford Explorer

2 Answers

...Install the starter solenoid connector by pushing it straight on. Ensure that the connector locks in position with a notable click. Install the starter cable nut to the starter solenoid B-terminal. ...

Not finding what you are looking for?
1998 Ford Explorer Logo

4,510 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

2003 Ford Explorer
2003 Ford Explorer

1,369 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...