1998 Ford Explorer "remove rear high level brake" Questions

...(LH and RH side of this assy). remove the covers and using a phillips screwdriver, remove the screws and lift the assy up and away from the rear glass. you now have access to the bulb and

rear (drivers side in the UK). Here's how I fix mine, although it does keep happening every now and again: Remove the lights cover from inside the boot, it is held in place by a couple of plastic nuts

...rear window of my 2.5 v6 tdi 2001 estate? I have 1 of the lamps out, and need to change it. Thanks. also where can i get hold of an original owners handbook for the car? i beleive the cover snaps on ...

...REAR BRAKE LIGHT TO THE HIGH LEVEL BRAKE LIGHT , JUST FIND THE WIRING FROM HIGH BRAKE LIGHT TO LOW & REPLACE OR FIND THE SHORT & SPLIT THE CABLE REMOVE 5-8 MM OF SHEATH FROM EACH SIDE & ...

...rear led break light First remove the trim to expose 6 screws remove the screws and pull the high mounted brake light from its housing or cut out. when loose unplug the connector the light it is now ...

...remove all 4 wheels. now loosen the bleeder screw on your passenger rear caliper. let the fluid come out until theres no more bubbles. keep an eye on the brake fluid reservoir, dont let it get empty! ...

...remove ALL air in a system is to jack the front of the car super high (safely). Open the rear bleeders and keep the cap removed from the master. Keep an eye so the level doesn't go too low as gravity ...

...rear washer jet: The whole high-level brake light unit (which the rear washer jet is part of) can be pushed out by raising the rear door and locating and pushing on the two locating studs behind the ...

...rear. Remove the wheels from the vehicle. Clean all dirt from around the master cylinder fill cap. Remove the cap and fill the master cylinder with brake fluid until the level is within 1/4 in. (6mm) ...