1998 Ford Explorer "remove car fuse block holder" Questions

Remove the cover and locate fuse # 10. Should be in the 3 rd. row down from the top. This is the fuse for the turn signals. Should you need any further help please just ask. Please rate the quality of

...fuse block, either the under dash one or the power distribution center under the hood, probably the easiest way to do that repair without replacing the entire block would be to take it apart so you ...

...car won't start. Funny that the fuse link is not open. Tried pulling fuse with pliers but just breaking plastic of fuse which won't even wiggle. How do you get the fuse out & what is next thing to ...

...car is different as to where the blocks are located and how the components are arranged on the block. The simple way of finding your answer lies in the rear of your owner's manual. Back in the ...

...car manual and can't find were to check the fliud. The 2007 HRR uses and electric power sterring and steering control. There is a fuse in the number 19. The floor console fuse block is located on the ...

car hood. There is a black box with a snap-on cover to the right of your battery. Once you remove the top cover, look inside the top and it wiil show you which relay is your A/C relay. I believe it is

fuse, open the hood and the horn is located behind the grill. Remove the wire from the horn. To fix the problem correctly it's possible that the horn relay is stuck closed which is why the horn blows.

...car to remove fuses from the panel. The tool is located on the back of the interior fuse panel cover. Relay The main relay box is located on the upper left-hand side of the firewall (bulkhead). There ...

...remove the light bulb holder in the tail light assembly and look at the area that the bulb and holder came from either the metal that makes contact with the holder for the bulb is depressed, or in my ...

...fuse block or power distribution block were not inadvertently pulled out. One of the signal light wires might have been pulled out. Also check to see that your flasher module was not pulled out of it ...