...Battery Disconnect or Replacement Problems You may need to take your vehicle to the dealer to have it reset by a factory scan tool . If you want to solve your problem, click on the link I attach 2005 ...
2005 Ford Explorer cylinder 5 misfire, I changed coil pack and spark plug, problem still exist. Keep in mind the spark plug wires is what transfers the electricty from the coil to the spark plugs #5 ...
2005 ford explorer.the kids were playing with everything and the battery died,went to jump it,it clicked a few times,now if i run a jumper wire from the positive on the battery to the solenoid on the ...
...battery gage does not change and lights do not go deem. I took it to a different garage and was told this is a known problem for explorers and expeditions and it could either be the sensor ...
2005 Ford Explorer 4X4 it won´t start not even turn over with the key, when I activate the start relay it turns over but will not start. I have already change the computer, what else could be
...battery gage doesnt' change, lights do not go deem and no problems starting. I took it to a different garage and was told this is a know problem for explorers an expeditions. I was ...
Question about Ford Explorer
...problems. changed the throttle position sensor, throttle body motor, and the ignition coil. when the throttle body motor was changed there's no electricity running through. Does anyone know ...
Question about Ford Explorer
...problems with the Throttle Body (TB)not just your coolant,etc.. If it is sticking,dirty,causing misfires,etc. then this can cause an engine fail safe mode.You might first try putting in some injector ...
battery gage and nothing changes and I also check if any lights go deem, and they dont. I have not had any problems starting my vehicle either. The beeping noise can be agnoring, but i don
4,510 questions posted
Usually answered in minutes!
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions
1,369 Questions
