Question about Ford Explorer
...it toward off. Not much pressure, just enough to turn the key when the lock releases. With your other hand, move the steering wheel right and left. There should be a click, then your key will
...move the sift lever. You should hear a click noise with they key in ON position and you step on the brake pedal. TRy this witohout starting the engine & listen. The bypass emergency procedure is ...
...move the lever slightly, do the turn signals start flashing again? does it happen for both left and right signals? perhaps the connector on the switch has become loose. to inspect the switch, remove ...
...key to unlock the steering wheel. This is caused sometimes by the steering being in acertain position that places pressure on the mechanism and it locks up. Try turning the steering wheel in the ...
Question about Ford Explorer
latch and the door handles and key lock cylinder. If one breaks it will usually work. But if two break, you get the problem you have now. Too much slop. Your best bet to find them is at a salvage yard
Question about Ford Explorer
...move out of park with the key in the ON position, it will need to be unlocked manually. Symptom Chart Condition Possible Sources Action Shift interlock system does not release/lock correctly Shift ...
Question about Ford Explorer
...key to the run position 8 times then stop on the eighth turn in the run position, all the door locks (lock buttons move up and down) will cycle through one time,. You are now in the programming mode. ...
...move the steering wheel from its locked position? Sometimes when a vehicle is parked with the wheels in a loaded position the steering lock interferes with the ignition key switch operation. If this ...
lock solenoid. Or you may be on a steep hill and have too much pressure on the park gear. You may be able to turn the key switch to the unlock position and take the transmission out of park before you
Question about Ford Explorer
...move it On most fords, you should be able to with the key in position 1...if not, hook jumper cables to it so the Brake On/Off switch will activate the shift lock solenoid with the key on position
4,510 questions posted
Usually answered in minutes!
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions
1,369 Questions