1998 Ford Explorer "location shaft speed sensor" Questions

turbine shaft speed sensor is located inside the transmission. The transmission will have to be removed and disassembled to access the sensor. The sensor you have now... sound about what it looks like

Location of Speed Sensor 1998 Ford Explorer XLT Where is the speed sensor located on the transmission on a 1998 Ford Explorer XLT 4.0 V6 engine? polarcycle is right but there is a speed sensor on the ...

94 ford explorer 5 speed manual trans speed sensor for cruse control where located how to replace the VSS is located on the side of the transmission case on the tail shaft housing, see photo below.

Where is the speed sensor located It has a manual transmission and is 2 wheel drive The sensor on the very back of the transmission. Close to the drive shaft.

Location of input speed sensor on 98 explorer automatic it is located on the output shaft housing of the transfer case. hope this helps and dont forget the thumbs up. cheers

...shaft speed. In the A4WD (C-Trac) system, the GEM varies the torque sent to the front driveline by controlling the transfer case clutch. At rest and under cruising conditions, the GEM activates the ...

...Shaft Speed Sensor Circuit Failure GEM GO to Symptom Chart. P1837 Transfer Case Rear Shaft Speed Sensor Circuit Failure GEM GO to Symptom Chart. P1838 Transfer Case Shift Motor Circuit Failure GEM GO ...

...shaft speed. In the A4WD (C-Trac) system, the GEM varies the torque sent to the front driveline by controlling the transfer case clutch. At rest and under cruising conditions, the GEM activates the ...

can't locate output speed sensor Hiya Trees, I think what you are looking for is the Speed Sensor which is located near the Transfer case close to where a normal tail shaft housing would be.

...speed senser cam-shaft pulley WERE IS IT LOCATED Sorry you said camshaft sensor look behind the intake manifold back next to the firewall the sensor should be their but, i don't no about a pulley ...