1998 Ford Explorer "headlight connectors" Questions

...Headlight switch and the connector to it as one repair. Do not cut all the wires at once when you splice in the repair connector, one at a time, solder the individual wire connections and shrink tube ...

right headlight goes out and stayes out for weeks and then comes back on Possible bad ground connection at headlight wiring connector. Check for any burned/loose wiring at the connector. You can also ...

headlights cut in and out runninglights stay on.... 93 explorer my headlights turn on and off in a irregular pattern..thinking it's a short i have replaced the headlight switch same problem... any ...

Headlights go out My headlights turn on and work just fine when I start my car, but then after a few minutes of driving they always shut off. My parking and rear lights stay on, but the headlights ...

Color wirecoding of connector for 98 Explorer headlight connector I. e. black, blue/orange, black/tan. this is an eight wire connector Go here for wiring diagrams. http://bbbind.com/free_tsb.html

headlight switch When I was turning on my headlights the switch came off. The piece that it goes to is loose & go back in the hole. I can reach it & pull out with pliers. Is there a way I can fix it ...

headlight switch, they connectors can get burned and the switch contacts as well this can cause the loss of lights like you have. Replace the headlight switch and connector as one repair, do not crimp

...connectors in the wiring loom for the head lights and also where the connector plugs onto the rear of the headlight globe itself. Sometimes the metal spade connections are not secured properly within ...

how can i change my front headlight I believe if you raise the hood and look behind the headlight, you will see a connector which you can twist a quarter turn and remove the connector and bulb. Then ...