...drive shaft remove the drive yoke off the pinion shaft remove the old seal install new seal install front drive shaft. PS check pinion bearing play before removing drive yolk. if it is loose then you ...
...drive shaft and universal joint away from the rear differential yoke by hand. 4Remove the retaining rings that hold the universal joint into the drive shaft with needle-nose pliers. 5Support the end ...
...drive shaft supposed to turn freely the shaft from the transfer case to the front differential should not turn free by hand because it is connected to the differential. Hello The ...
will damage the vehicle if i drive it without the shaft. is there anything else i should be looking for? HELP! DONT DRIVE WITH OUT DRIVE SHAFT. JUST REPLACE THE UNIVERSAL JOINT BEARINGS ON DRIVE SHAFT
...drive shaft U-joints, front left axle shaft , tires, rims, brakes, ball joints. And so on. Still have that vibration that looks to me like a misbalanced shaft somewhere both I just cant figure out ...
Question about Ford Explorer
...drive shaft in. Replaced the drive shaft and it still makes a popping or clunking noise. So I took the drive shaft back out and it stopped making the noise. What could the problem be? Thanks in ...
...explorer drive shaft 4.0L 2wheel drive automatic Hello! Your particular truck has a CV-type drive shaft. The retaining bolts for it require 61 - 87 ft/lb of torque each. Hope this helps and good
...drive shaft problem... Is there a front drive shaft on this vehicle? Took it into be srviced and mechanic said my front end grind (sounds like muffler dragging in front) was my drive shaft needing ...
Question about Ford Explorer
...drive shaft and the rounded boxy thing( dont know english Word for it) by the rear axel shattered when driving 2 wheel drive on road, why? The universal joints on the drive line shaft and the ...
Question about Ford Explorer
drive shaft in the front to get rid on my 2003 exp can i drop the drive shaft in the front to get rid of a 4 wheel drive. Because it keeps trying to engage and i have to replace a fork in the transfer
4,510 questions posted
Usually answered in minutes!
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions
1,369 Questions