1998 Ford Explorer "2002 spark plug wire" Questions

...spark? which should i change out first? coils, plugs, wires? thanks MoreMy 2002 Ford Explorer upper hose blew off while on highway. immediately exited and seen the hose. re-attatched hose, put water ...

2002 ford explorer 4.0lwill turn over but back fires when trying to start How many miles on engine? Skipped timing chain is possible, or bad coil pack and spark plug wiring.Nobody could've ...

...spark plug problem, click the help links provided below: --- Car has no spark? http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html ------------ How to Replace Spark Plugs? ...

a miss changed the spark plugs and wires and now there is a miss. checked the plugs and wires but there is still a miss. check all of the vaccum lines also check the one behind the throttle body, also

spark plug wire and just put it close to where plug spark will jump about 1/4 inch...DO NOT HOLD ON TO WIRE. kinda like a tazzer.but use something wood and turn engine over .if there is spark then you

...2002 ford explorer 4.0 start? I just changed the valve cover gaskets, put everything back together and it wont start. I checked spark and noticed 1 plug was not firing. I decided to change the coil ...

...2002 and i dont know what is that. Code p0304 i woulk you guys told me how can i fix it P0304 is a number four cylinder misfire. Check the plug to see if it is carbon tracked or worn out. Make sure ...

2002 ford explorer runs really ruff, when idoling and accelerating, If it hasn't had the spark plugs and wiring changed within 60,000 miles,I'd change them out.  Clean the MAF sensor with

and tps sensor. No codes? In the following order I would clean the idle air control, change spark plugs, check plug wires, check for vacuum leaks, run some fuel injector cleaner through your fuel tank

trouble codes po304 how can i fix it First try replacing the plugs and wires. You can reach the spark plugs easier from inside the fender well sometimes. If it makes a nasty noise while running then ...