1998 Ford Expedition "start missfiring spark" Questions

Ad

missfire on 1 and 6 cyclinder running fine this morining then engine starts skipping looked at OBDII tool had missfire codes change cylinder 1 and 6 coils and all the spark plugs when the last time ...

Ad

Question about Ford Expedition

1 Answer

start it up? Its common for the ignition coils to fail on the 3.9v6 on the LS due to water intrusion. If you have access to a scanner you can see which cylinder it is that is missfiring and swap coils

Ad

Question about Ford Expedition

1 Answer

...start the engine may stumble / stumble, and/or hesitate other symptoms may also be present Causes: A code P0301 may mean that one or more of the following has happened: Faulty spark plug or wire ...

Question about Ford Expedition

1 Answer

missfire my 2.5 20 valve has started to missfire when it warms up,and only does it at low revs,has anybody got any ideas what could be causing this ?. Thanks On the assumption that normal servicing is

...missfiring on cylinder #6. I even changed the spark plug and wires to a new one. I can't find any vaccuum leaks. Any answers? I've had enough with this truck. do you have a seperate coil for each ...

Question about Ford Expedition

1 Answer

MISSFIRING. ALSO DO A COMPRESSION CHECK.IF ONE OR MORE OF THE CYLINDERS IS WEEK WILL CAUSE THIS ISSUE. MANY THINGS CAN CAUSE THIS SUCH AS POOR FUEL QUALITY, SPARK PLUGS AND OR ONE OR MORE OF THE COILS

...spark plugs may very well be fouled. After seafoaming a car it's a good idea to really open it up to burn off the foam and residue. P0316= misfire in 1st 1000 revolutions when start ups. P1270 - ...

Question about Ford Expedition

1 Answer

...where to start I hope you used AC Delco plugs. Make sure the spark plug gaps are correct. Also, make sure you torque the spark plugs to manufacturer's specification. This would be a good start. ...

...start valve problem. and where is it. You might want to pressure test the cooling system and remove the #3 spark plug.  After the pressure tester sits on there for a few hours look into the ...

...start missfiring again 4 cilinder check new spark plugs for proper gap. It may have gotten hit when installing it.check coils second for resistance/firing. sometimes one bank will work fine and the ...

Not finding what you are looking for?
1998 Ford Expedition Logo

2,497 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Expedition
2000 Ford Expedition

2,188 Questions

1999 Ford Expedition
1999 Ford Expedition

1,825 Questions

2003 Ford Expedition
2003 Ford Expedition

1,696 Questions

2001 Ford Expedition
2001 Ford Expedition

1,161 Questions

1997 Ford Expedition
1997 Ford Expedition

1,048 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...