1998 Ford Expedition "replacing temp sensor 98" Questions

...sensor these can be incorporated with temp guage on some vehicles but theres also the problem of alternator is getting ready to give only take an electro meter and hook up to cigarette lighter with a ...

...my temp gauge is not moving at all. what could the problem be temp gauge not moving sending unit most likely needs replacing Sounds like you need a new temperature sensor. Check the thermalstat

...forward and backward if so it's the fan. I have come across alot of bad fans. Fan would cost $30 and up. Rate of difficulty 1-10 I give it a 4. coolant temp sensor and fan clutch need to be ...

temp sensor on a 4.3L '98 Blazer is located, if it's the one that runs the temp gauge, is on the passenger side above the exhaust manifold. ------------------------------------------------------------

...temp sensors on top oo intake..heard there is a sensor under intake...ran fine before this....does anyone know a solution to this problem the intake air temperature sensor is located inside the air ...

...temp high input,I replaced the sensor in the coolant line and it still does it. The sensor you replaced was the ECT (engine coolant temp)? Check your coolant level and air in the lines. Do a coolant ...

...I also replaced the spark plugs as well. What else could be the problem for the check engine light. Sounds like a bad engine temp sensor to me. Also could be a intake or EGR leak causing the 02 ...

...sensor to start switching being based on coolant temp, if your thermostat is not operating properly, it could cause the coolant temp to take longer than what is considered by the ECM to be normal. ...

...when I was changing my water pump and I tried to splice it and reconnect but now temp gauge goes straight to hot soon as I turn on key with o Temp gauge for mpv 98 replace the sensor it's ...

...replacing the sensor, try improving a possible poor connection by disconnecting and reconnecting the sensor a few times. I've experienced this on my '98 Astro, and the temp displayed correctly after ...