1998 Ford Expedition "remove belt pulleys" Questions

Ad

Question about Ford Expedition

2 Answers

...remove the drive belt. Rotate the drive belt tensioner clockwise and remove the drive belt To install: Installation is the reverse of the removal procedure. Make sure the belt is routed properly ...

Ad

...belt off the air conditioning compressor's pulley. Remove the bolts which secure the air conditioning compressor to its mounting brackets with an open-end wrench, then position the compressor to the ...

Ad

...belt and remove the belt from all of the pulleys STEPS 5:Remove the new serpentine belt the same way that the old one came off by following the belt routing diagram instruction.Do not put the belt ...

Question about Ford Expedition

1 Answer

...on the pulley bolt, and remove belt, once belt is removed, turn rachet/breaker bar the oposite way to loosen bolt, remove old pulley and install new one. Don't forget to rate this post, Good

...Remove the old belt. Thread the new belt into place, getting it ready for the last appliance in line. Displace the tensioner enough to safely attach the belt to the last pulley in line. Release the ...

...before installing the new belt.  Try using one of the nongrooved pulleys as the last pulley to slip the belt on.  You will need to compress the tension pulley to remove or replace the

...under the hood or on the front crossmember of the engine bay. This will indicate the location of the tensioner pulley, which you will need to loosen to remove and install the new belt. Hope, ...

Question about Ford Expedition

1 Answer

...belt and remove the drive belt from the alternator pulley. Remove 3 alternator retaining bolts and remove the alternator. To install: Place the alternator on the engine and install 3 alternator ...

pickup speed make a chirping sound when idle. i check pulley & belt (ok) remove belt but still made chirping sound when idle. engine run smooth check tensioner pulley, or what pulley did you check

...may be dry or cracked, try having the belt replaced ,before replacing the belt have the belt removed and all the pulleys checked, a worn pulley will also cause a chripping sound, hope this is

Not finding what you are looking for?
1998 Ford Expedition Logo

2,497 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Expedition
2000 Ford Expedition

2,188 Questions

1999 Ford Expedition
1999 Ford Expedition

1,825 Questions

2003 Ford Expedition
2003 Ford Expedition

1,696 Questions

2001 Ford Expedition
2001 Ford Expedition

1,161 Questions

1997 Ford Expedition
1997 Ford Expedition

1,048 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...