1998 Ford Expedition "latch back door jeep" Questions

...back door won't open how do I get it open. The latch won't work What I had to do for m jeep was enscrew the screws at the top of the panel, then pull back the panel enough to get my arm down and ...

...the door latch/acuator. Probably a broken wire between body and door. Peel back the rubber gasket that the wires are running through into the & I bet one or more will be broken. Just splice ...

basically just open the lower door. 2002-2007 Jeep Liberty: Liftgate glass latch replacement https://www.youtube.com/watch?v=a4BHbvJ5n84 If not should be able to pull back plastic panel for lower door

...latch with a scredriver, back into the open position. If the latch has broken internally you will need to remove the inner door panel and remove the latch assembly for visual inspection and ...

...back wont open You can temporarily unlock the door by accessing the latch from the inside of the car, and forcing the latch to open with a big screwdriver. If it gets stuck again, then you will need ...

...latch. What i did from this point is to use J/B Weld to attach the rods back to the clips. Clip are not reusable and for the fix from the Dealer they want to replace the latches and rods.Hope this ...

...back door will get seized with age.  When this happens the latch assembly will stay stuck halfway open and closed allowing you to close the door.  when the door locks the latch will ...

back soft top side. anyways im just looking for a cheap way to remedy this so my door doesnt keep flying open while im driving 65 on the highway. Start out by checking the latch mechanism on the door.

...back doors wont open from inside or out and the locks are electric but they lock and unlock. Whats my best way to solve my problem? The problem you have posted suggests that the rod that goes between ...

...latch. I have a 1997 Jeep Grand Cherokee when i start it it cranks over and over again and finally starts and it runs a little rough when it first starts up but smooths out quick. I just changed the ...