1998 Ford Expedition "fuse brake lights" Questions

...FUSE IF BRAKE LIGHT FUSE IS GOOD.THE BRAKE SWITCH IS BAD OR HAVE A OPEN FROM FUSE BOX TO THE SWITCH.IF BRAKE LIGHTS WORKING.THE DEALERSHIP HAS TO SCAN VECHICLE BECAUSE CRUISE CONTROL SYSTEM IS ...

brake light fuse (In the fuse box and labeled as such) 2. The brake light switch/relay - also called a stop light switch. It's under the dash, right behind the brake pedal arm. When you push the brake

brake light do not i check all lights and fuses are good. Video vee ch cheek fh thumb If the brake light bulb and brake light fuses are checked ok and you are confirmed that its properly working then ...

...brake light fuse or the brake light switch.The brake light switch is causing the turn signal light to stop functioning.Check out both the brake light fuse and the brake light switch. Thanks. Keep ...

...brake light fuse. Or the other reason is fault in wirings if the fuse is checked out OK. If both the brake light fuse and wirings checked out OK then its time to check the brake light switch. To find ...

fuse go buy a package of brake light bulbs at the auto store. Then replace the bulbs. Hope this helps Matt I have the same problem but the bulbs are fine. The fuses are fine. I checked the brake light

...brake light fuse first if brake light fuse okay.you replace brake light switch by removing trim panel below steering column.look under brake pedal area unplug electrical connector .remove the cotter ...

...Brake Lights. This Bulb is Burnt out on the Brake Coil inside the Bulb. I have actually seen Bulbs that were Bad But you could not Tell by jast looking at them. It should be fine with a New Bulb. ...

fuse is for the brake lights. Pull out the fuse and look at the wire in the central window. If the wire is broken, replace the fuse. Make sure the new fuse is not blown, and carries the same amperage.

...brake lights, just running lights. The fuse is still good, but I replaced it anyways. Still no turn or brake lights but running lights are ok, even with a wire bypassing the fuse under the hood. Now ...