1997 Ford F150 Regular Cab "bleed propane" Questions

Ad

...bleed, banking on the fact that there is still brake fluid in that caliper .. otherwise you may end up replacing that caliper. Heat up the area around the bleeder but not the bleeder itself (this is ...

Ad

...had to remove propane line from evaparator to get the hood off do i need to bleed the air out the lines Air in any gas line water line oil line will cause it to run poorly Yes bleed it if you know ...

Ad

Question about Ford F-150

1 Answer

...works fine I also installed new brake hoses and new rear wheel cylinders then spent several hours bleeding brakes. I have good solid brake pedal but only after pumping the brakes twice when car is ...

...bleed them Brush the bleeders with DOT 3 Brake fluid and let soak in for 24 hours, or so. The Brake fluid should free up the rust. Also, could try to heat it up a little with a propane or Mapp gas ...

...other than that. A friend told me it will be a very big job to replace the lines. true or not true Bleeding brakes are really not that hard. I did it to my truck. Bench bleeding brakes. 1. Put on

...have to heat up fitting with a torch not a propane torch won`t get hot enough.remove wheel cylinder bolts that hold it to the backing plate and remove.assembly in reverse order and bleed

Question about Cars & Trucks

1 Answer

...bleed brakes on mercades 1983 Cause brake failure for many reasons, 1 is lack of necessary maintenance for braking system, brake master cylinder in too much impurity, untight seal, vacuum ZhuLiBeng ...

...propane touch on the bleeder for 10 seconds or so then brake it free then bring it back so its slightly open. Then get a 10 inch Cclamp put it over the calipar and the side with the screw in side the ...

...propane at tank get no gas at stove is there a another shut off valve Gas could take 10 - 20 seconds to get to the stove. Air has to bleed out of line. Also if you have dual tanks , there could be a ...

...propane to get to the stove. ( 20 seconds maybe ) All the air has to bleed out of the line first. Also , if you have 2 tanks , there could be a selector switch on the regulator where the 2 tank hoses ...

Not finding what you are looking for?
1997 Ford F150 Regular Cab Logo

1,829 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Ford F150
2004 Ford F150

2,636 Questions

1990 Ford F150
1990 Ford F150

1,214 Questions

2005 Ford F-150
2005 Ford F-150

1,298 Questions

2006 Ford F-150
2006 Ford F-150

1,038 Questions

1991 Ford F150
1991 Ford F150

974 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...