my 2000 crown vic won't get out of park..what to do push the brake and see if brake lights are working if not then replace the brake light switch.
crown Vic won't shift out of park All 2000 and up vehicles utilize a Solenoid which is powered by depressing the Brake Pedal to allow the Shift Lever to be move from Park to any other position. Is
Question about Ford Contour
...2000 Crown Vic and occasionally there is white smoke coming from drivers side(closest to me) just minutes into driving. Its only noticeable while at a light or when parked and I have just cut Brake ...
crown vic dash light running light problem. brake lights headlights turn signal dome light hazard's work fine replaced headlight switch still no parking lights or dash lights.can only drive during the
Question about Ford Contour
crown vic 2000 wont crank ? battery, alternator,starter,starter relay all good ? Hello i have a shortage in my car before, every time i start the car the starter fuse 30A broke, turns out that the ...
...2000 crown vics engine runs rough in park at mid throttle,and drives like i am on a bumpy road at mid throttle,replaced shocks, tires, balancing,alignment. please help I suggest you look at or have ...
Question about Cars & Trucks
2000 crown vic Y do my fuse keep blowin for my dashboard lights, tail lights, and park lights You have a short somewhere in the circuit. I'd try following the loom going under the car back to the tail
...2000 crown vic intercepter, it goes back and forth starts in park somtimes. if not i will put it in noutral and it will start, my shifter is very loose, what to do? Replace it as well as any selector ...
Question about Ford Contour
...crown vic loses power at around 35mph.What could cause this? I must pull over, put it in park, and then shift to drive again to get it to go again. Ran fine once engine was warm and speeds got up to ...
Question about Ford Contour
2000 crown vic , my turn signals, my dashboard lights, and the parking lights all stopped around the same time; I replaced the lighting control module,that did not work, nothing changed, what else ? ,
387 questions posted
Usually answered in minutes!
875 Questions
534 Questions
405 Questions
353 Questions
309 Questions